Two Rivers Power Terms and Conditions of Sale

The TS 970 Thomson contactor transfer switch is now available to sell from the McAllen, TX stocking location.  Available in 3 or 4  Pole, 100A – 400A.  Leadtime for a standard 3 Pole is next business day shipment from receipt of Purchase Order.  4 Pole and 3 Pole with options, Lead Time is 5 days.

As with the TS 870’s, there are options available for the TS 970’s that can be added to the stock ATS.  Units will be shipped from Langley.

Stocked in Houston. Call us today for competitive quotes. SCiB battery options available.

“The Toshiba G9000 Series UPS megawatt unit’s high efficiency, modular design, and small power density footprint is ideal for expanding datacenters,” said Greg Mack, Vice President and General Manager of the TIC Power Electronics Division. “The advanced technology and compact design allows an easy to install, operate, and grow-as-needed system, ideal for any large datacenter”.

Not only is this impressive series highly efficient, it is also diverse in power.  Ranging from 100kVA all the way up to 2000kVA. The Toshiba G9000 Series Uninterruptible Power System (UPS) utilizes state-of-the-art design and construction to deliver industry-leading efficiency, reliability, performance, and flexibility to meet today’s critical power demands.

Toshiba G9000 Series Uninterruptible Power Systems Now Available in 1 to 2 Megawatt Models

HOUSTON, TX — Sept. 18, 2017 — Toshiba International Corporation (TIC) now offers the industry-renowned G9000 Series Uninterruptible Power System (UPS) in 1, 1.3, 1.5, 1.6, and 2 megawatt (MW) capacities. Toshiba G9000 models are now in stock at the Houston facility and ready for delivery.

“The Toshiba G9000 Series UPS megawatt unit’s high efficiency, modular design, and small power density footprint is ideal for expanding datacenters,” said Greg Mack, Vice President and General Manager of the TIC Power Electronics Division. “The advanced technology and compact design allows an easy to install, operate, and grow-as-needed system, ideal for any large datacenter.”

Toshiba G9000 Series MW units are double-conversion, voltage and frequency independent (VFI), UPS models utilizing the latest generation of carrier stored trench-gate bipolar transistor (CSTBT) technology configured in a multi-level pulse-width modulation (PWM) architecture designed specifically for the G9000 UPS. The transformerless MW units are configured in a parallel modular design for capacity. The parallel modular design can also be used for internal N+1 redundancy at reduced loads allowing for a smooth recovery from an isolated module failure. Each UPS module is controlled by a digital signal processor (DSP) to a direct digital control located in the Control, Hybrid Static Switch, I/O (input/output terminal) main cabinet. Up to six G9000 MW systems can be paralleled for capacity or for redundancy.

The modular CSTBT multi-level, PWM architecture enables 97% efficiency in double-conversion, VFI, mode of operation. The efficiency level is near constant over the entire normal application load range. The resulting efficiency minimizes the cooling requirements for large independent, co-location, and cloud hosting datacenters. The reliable and robust CSTBT IGBT technology allows for a superior double-conversion AC power quality output needed for the longevity of servers and other sensitive data center load equipment.

Additionally, the modular design of the G9000 Series allows the critical quality power user to expand the system from 1 to 2 MW as load requirements increase. The small footprint, power density mechanical design requires 0” rear clearance, and the easy-to-access I/O cabinet allows for ample top and bottom cable entry reducing installation time and cost.

The new 10″ color touchscreen LCD display provides an at-a-glance graphical status of the mode of operation as well as ease in navigating the UPS system data parameters including critical input, output, and battery power measurements. The G9000 advanced DSP control circuitry allows for self-diagnosing status of the entire system and each UPS module. The large memory storage included permits for a time-stamped pre- and post-voltage and current data recording when there is a critical fault event or an output overload.

External status monitoring is available through SNMP, HTTP/S (Web Interface), and/or the facilities network industrial bus (Modbus TCP/RTU, BACnet IP/MSTP) is accomplished through an optional Toshiba RemotEye 4® multimode network communication card.

The Toshiba G9000 Series is compatible with VRLA and wet cell batteries, as well as the proprietary Toshiba long-life SCiB® Rechargeable Battery energy storage system. The robust and reliable UPS design is backed by a three-year onsite warranty. Fast response and expert quality service is provided through an expansive nationwide UPS service network. The network of highly skilled UPS professionals provide fast economic emergency service as well as planned and preventative service maintenance agreements all coordinated by and through the Toshiba UPS Service Department. Such well-trained reliable service not only expands the life but also maximize the ROI of the UPS system.

Catch water leaks before they become a severe problem

http://www.packetpower.com/blog/catch-water-leaks-before-they-become-a-severe-problem

Packet Power is pleased to now offer a power monitor capable of measuring energy usage on 480V AC circuits. The new product maintains the same compact form factor as our existing three-phase monitor and extends our wireless metering to include 480V 3-wire delta and 277/480V 4-wire wye circuits.

The 480V three-phase power monitor tracks A, V, VA, W, Wh, power factor, frequency, THDv and THDi at ±1.0% accuracy. It is used in new models of our “B”, “P”, “M” and “R” product lines. The existing 240/415V monitor and its associated products are unchanged and will continue to be sold and fully supported.

The new monitor extends the simplicity of wireless monitoring to 480V circuits. It also makes wireless monitoring a more viable solution for use in facilities outside of data centers. The new unit can be powered independently of the circuit it monitors and utilizes the same wireless technology as our other meters. An optional wire harness with in-line fuses is available to lower installation costs.

The 480V monitor is available immediately in a variety of formats including gang boxes, panel enclosures and smart power cables. Contact sales@packetpower.com if you’d like to learn more about Packet Power’s simple, cost-effective solution for monitoring 480V circuits.

PQI Launches All Standard Products in AUTODESK®/REVIT® – Building Information Modeling (BIM) Formats for MEP Firms

PQI is pleased to announce that all standard PQI Products – Harmonic Mitigating Transformers (Distribution TransFilters™), Ultra-High Efficiency Transformers (e-Rated®) and Zero-Sequence Harmonic Filters (I₀Filters™) are now available in AUTODESK®/REVIT® Building Information Modeling (BIM) software (http://seek.autodesk.com).

Many MEP firms and End-User Customers utilize REVIT®. PQI is excited to now be included in this Building Information Modelling (BIM) Software.

http://www.globalbusinessnorthamerica.com/index.php/hot-off-the-wire/item/396-toshiba-international-corporation-introduces-the-5000-series-uninterruptible-power-system-for-industrial-and-outdoor-applications